Engine Sealers – Victoria

Please contact the following Group N Authorised Engine Sealers to arrange to have your engine inspected, measured and/or sealed. This is NOT a free service. Discuss the payment prior to calling them out.

The Procedure is as follows.

The purpose of engine sealing is to maintain the integrity of the cylinder bore and stroke measurements.

 All engines to be sealed by a;

1. Historic Eligibility Officer or,
2. Motorsport Australia Technical Commissioner or,
3. Any Motorsport Australia category authorised engine inspector/engine sealer

Engines are to be sealed in accordance with the following procedure.

1. The sealer for the engine being sealed will not have any association with the particular vehicle which the engine is being sealed for.
2. Engine to be assembled to a short motor.
3. Measure cylinder bore and stroke.
4. Bore and stroke must respect the engine regulation and specification information. Refer to the Motorsport Australia Specification Sheet for the particular vehicle. If the measurements exceed the allowed specifications then the engine will not be sealed.
5. Observe for any unauthorised modifications.
6. Bolts to be wired and seals to be in place as necessary.
7. List bore/stroke measurements and any observations on the form.
8. The engine sealer is to provide to the competitor a Motorsport Australia Engine Inspection Sheet signed with a clearly printed name of the inspector.
9. The Competitor will retain a copy of the engine sealing results for your records as you may be required to provide this information to the Motorsport Australia representative when requested.

Download the Engine Sealing Form here…

For a full list of Group N Authorised Engine Sealers around Australia, click here…